Control Panel screenshot

Overview

Control Panel pairs an Arduino with an Android app to control an Adafruit NeoPixel strip. The total cost was about $130 plus shipping.

Parts

  • Arduino and NeoPixel strip
  • BlueSmirf Bluetooth module
  • Spectrum Shield
  • Key switch and barrel jack extension cable
  • An enclosure and a 5V power supply with a center-positive 5.5 x 2.1 mm barrel connector

The build

  • Cut openings in the enclosure for the key switch and the power jack.
  • Split the extension cable, join the grounds, and run the power line through the key switch.
  • Plug in the Arduino and confirm the key turns it on.
  • Add the Spectrum Shield and bring power and ground to it.
  • Wire up the BlueSmirf, the NeoPixel data line, and the remaining power connections.

Software

The Android side used Amarino to handle the Bluetooth connection, and the Arduino sketch used a customized MeetAndroid library.